The 3 Best Rim Clamps and Mounts for Drum Microphones (2026)

A rim clamp saves a stand when you close-mic a snare or tom. Look for one that fits the hoop and lets you aim the mic clear of your sticks.
My top pick is the Shure A56D for a mic with a conventional threaded clip. You can mount it on the hoop or attach it to a compatible stand.
My second pick is the Audix DVICE Micro for a compatible Audix Micro Series mic. Its short gooseneck lets you aim the capsule close to the head.
Contents
The Best Rim Clamps and Mounts for Drum Microphones (2026)
1. Shure A56D
Pros
- Takes a standard 5/8–27 threaded mic adapter
- Adjustable position for a conventional mic clip
Cons
- Does not fit rims taller than 2 1/4 inches
The A56D accepts a standard 5/8–27 threaded stand adapter. Shure lists rims from 1/2 to 2 1/4 inches high or stands from 3/8 to 1 1/8 inches in diameter.
The stand-mount option is useful if you switch between drums and one hoop doesn’t fit. The threaded fitting also makes it a better match than either specialist clip if you use several conventional microphones.
2. Audix DVICE Micro
Pros
- Gooseneck helps aim a small mic
- Compact footprint around the hoop
Cons
- Intended for compatible Audix Micro Series microphones
The DVICE Micro is a useful option if the microphone is a supported Audix Micro Series model. The small gooseneck gives you room to bring the capsule in from the rim and angle it toward the head while keeping the body away from where you play.
The gooseneck is handy when there’s little room between the toms. If your mic sits in a conventional threaded clip, the Shure is the more suitable option.
3. Sennheiser MZH 604
Pros
- Direct fit for the listed Sennheiser microphones
- Keeps the setup compact around a tom
Cons
- Does not replace a universal threaded adapter
The MZH 604 is a replacement rim clip for the Sennheiser e 604 and e 904. It keeps the mic close to the hoop without adding a floor stand.
The e 604 and e 904 fit directly on the clip, so there’s no separate gooseneck or threaded clip to position. That’s handy when the toms sit close together.
How do you choose a rim mount for a drum mic?
Match the microphone attachment first, then the clamp to the drum. Some products take a standard threaded mic clip. Others connect directly to one microphone or product family. Look at the hoop’s shape and thickness as well as the diameter of the drum.
How close should the microphone sit?
Start where you can aim the capsule across the head without putting the mic under a normal stroke. Move it inward if you want more of the head or angle it toward the edge if that helps the sound and the clearance. Listen back after small moves rather than changing the position and EQ at the same time.
When would you keep a floor stand?
Use a floor stand if the hoop does not accept the clamp or if vibration through the mount is a problem on the recording. A stand is also useful with a longer or heavier microphone. A suitable clamp is the easier choice when the stage is tight and the drum has to move between setups.
Verdict
I’d use the Shure for a conventional threaded mic clip, the DVICE Micro for a compatible Audix, or the MZH 604 to replace the clip on a Sennheiser e 604 or e 904.
See our drum microphone kit guide for more.
Featured image by Shixart1985 (CC BY 2.0).






